Kelvinator JT4BE048KA Installation Guide download pdf (Page 17)

T4BE-060KA SERIES

SUCT.

PRESS.

OUTDOOR TEMPERATURE (°F)

70 75 80 85 90 95 100 105

LIQ.

PRESS.

DIS.

TEMP.

LIQ.

PRESS.

DIS.

TEMP.

LIQ.

PRESS.

DIS.

TEMP.

LIQ.

PRESS.

DIS.

TEMP.

LIQ.

PRESS.

DIS.

TEMP.

LIQ.

PRESS.

DIS.

TEMP.

LIQ.

PRESS.

DIS.

TEMP.

LIQ.

PRESS.

DIS.

TEMP.

121 244 135

123

245 135

267 141

125 246 135

268 141

290 147

127

247 136

269 142

291 147

313 154

129 248 136

270 142

292 148

314 154

336 160

131 271 142

293 148

315 154

337 160

359 166

133 295 148

317 154

338 160

360 166

382 172

135 318 154

340 160

362 166

383 172

405 178

137 319 154 341 160

363 166

385 172

406 178

139 342 160 364 166

386 172

408 178

141 365 166 387 172

409 178

143 388 172 410 178

145 411 178

147

Table 11. Charging Table for 5 Ton Models

(Restrictor Matches)

Shaded boxes indicate ﬂooded conditions.

Rated design values. The suction pressure will vary from design value if indoor air ﬂow, entering dry

bulb, or entering wet bulb temperatures are lower than design.

1. All pressures are listed in psig and all temperatures in ° F

2. Discharge temperatures greater than charted values indicate an undercharged system.

3. In Cooling Mode, suction pressure will be lower than design value if indoor air ﬂow, entering dry bulb, or entering

wet bulb temperatures are lower than design.

4. In Heating Mode, charge should be weighed in. It is strongly recommended to verify charge in cooling mode

at ambient above 70°F.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 23 24

Comments to this Manuals

No comments

Kelvinator JT4BE048KA Installation Guide Page 17

Comments to this Manuals